OnApp 6.2 Patch 4 (6.2.0-188)

28 May 2020

This is an update for the Control Panel server and static compute resources. This document provides information on improvements and fixes implemented as a part of the 6.2.0-188 update, as well as the upgrade instructions for Control Panel.

Starting from this version, vCenter v.7.0 is supported in OnApp 6.2. 

On this page:


The following improvements were implemented in the scope of the 6.2.0-188 update. 

KeyRelease Notes
CORE-16998Now you may use the Login as feature if the Global Whitelist is not configured.
CORE-16783Now you can add to a VS secondary disks larger than 2TB with limited support.


The following issues were fixed in the scope of the 6.2.0-188 update. 

KeyRelease NotesAffected Versions
CORE-16726When you tried to create a new CloudBoot compute resource and there were no disks attached to a particular compute resource, the Devices step of the creation wizard was empty.6.2 Patch 1-6.2 Patch 3
CORE-16779If there were several data stores assigned to one datastore zone in a bucket, and you created several VSs with no DS selected, all VS disks were in one DS with smallest size and available space.6.2-6.2 Patch 3
CORE-16813When you performed full migration or hot full migration of a VS between compute zones without changing networks, the network join remained the same at the Network Interfaces page.6.2

If you changed NIC or IP mode for a VS or vApp on vCloud side, the old NICs were not removed on OnApp side.

6.2 Patch 2
CORE-16946If you set any value for create_snapshot_timeout parameter in the on_app.yml file, and then performed any vCloud-related actions limited by time (compose vApp, start vApp, etc.), the timeout value was not applied. 6.2 Patch 2
CORE-16953The 500 Internal Server Error appeared as you double clicked the IP Ranges tab at the CDN Resources page.6.2 Patch 2-6.2 Patch 3
CORE-16993If the Show Compute resources on Virtual Server creation permission was disabled for a user, all networks were available for selection at the Resources step of the VS Creation wizard.6.0 Patch 9 - 6.2 Patch 3
CORE-16995An arrow icon was not aligned properly in the IP Addesses field on the Cluster Nodes step of the Load Balancer Cluster creation form. 6.2 Patch 3
CORE-17034If the libvirt command failed during Xen to KVM migration, rollback didn't revert the database changes. 6.2 Patch 2

Patch Installation

The instructions below are relevant if you already run OnApp 6.2.

Upgrade Control Panel Server

  • If you upgrade from OnApp >=6.2.0-146, run the following command:

    Run the Control Panel installer:

    # /onapp/onapp-cp-install/onapp-cp-install.sh --quick-update
  • If you upgrade from OnApp < 6.2.0-146, run the following steps (1-4). 

To upgrade your Control Panel server:

  1. Upgrade OnApp Control Panel installer package:

    # yum update onapp-cp-install
  2. Update your server OS components (if required):

    # /onapp/onapp-cp-install/onapp-cp-install.sh -y
  3. (Optional) If you need some custom Control Panel configuration, set the values before the installer script runs.

     The list of custom configuration options for Control Panel.
    # vi /onapp/onapp-cp.conf

    Template server URL


    # IPs (separated with coma) list for the SNMP to trap. This is the list of Control Panel IP addresses on which the traps sent from the compute resources are processed.


    # OnApp Control Panel custom version


    # OnApp MySQL/MariaDB connection data (database.yml)


    # MySQL/MariaDB server configuration data (in case of local server)


    Use MariaDB instead of MySQL as OnApp database server (Deprecated parameter. If you set any values for this parameter, they will not take effect)


    #Configure the database server relative amount of available RAM


    # The number of C data structures that can be allocated before triggering the garbage collector. It defaults to 8 million. Only change this value if you understand what it does.


    # sysctl.conf net.core.somaxconn value


    # The root of OnApp database dump directory (on the Control Panel box)


    # Remote server's (to store database dumps) IP, user, path, openssh connection options and number of dumps to keep

    DB_DUMP_SERVER_SSH_OPT="-o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -o PasswordAuthentication=no"
    DB_DUMP_CRON='40 * * * *'

    Enable monit - tool for managing and monitoring Unix systems


    # If enabled (the 1 value is set) - install (if local box) and configures RabbitMQ Server (messaging system) for the vCloud support. (Deprecated parameter. If you set any values for this parameter, they will not take effect)


    # Rotate transactions' log files created more than TRANS_LOGS_ROTATE_TIME day(s) ago


    # Maximum allowed for uploading file size in bytes, from 0 (meaning unlimited) to 2147483647 (2GB). Default is 0.


    # Timeout before ping Redis Server to check if it is started. Default is 10 sec.


    # OnApp Control Panel SSL certificates (please do not change if you aren't familiar with SSL certificates)

    # * The data below to generate self-signed PEM-encoded X.509 certificate

    SSL_CERT_COMMON_NAME=`hostname --fqdn 2>/dev/null`

    #   SSLCertificateFile, SSLCertificateKeyFile Apache directives' values

    #   ssl_certificate, ssl_certificate_key Nginx directives' values


    # * PEM-encoded CA Certificate (if custom one exists)
    #   SSLCACertificateFile, SSLCertificateChainFile Apache directives' values
    #   ssl_client_certificate Nginx directives' values


    #   SSLCipherSuite, SSLProtocol Apache directives' values

    #   ssl_ciphers, ssl_protocols Nginx directives' values

  4. Run the Control Panel installer:

    # onapp/onapp-cp-install/onapp-cp-install.sh --quick-update

    Please, answer ‘yes’ when installer prompts to initiate images, templates, and ISOs download. 

     The full list of installer options for Control Panel.


    /onapp/onapp-cp-install/onapp-cp-install.sh [-c CONFIG_FILE] [--mariadb | --community | --percona | --percona-cluster] [-m MYSQL_HOST] [--mysql-port=MYSQL_PORT] [--mysql-sock[=MYSQL_SOCK] [-p MYSQL_PASSWD] [-d MYSQL_DB] [-u MYSQL_USER] [-U ADMIN_LOGIN] [-P ADMIN_PASSWD] [-F ADMIN_FIRSTNAME] [-L ADMIN_LASTNAME] [-E ADMIN_EMAIL] [-v ONAPP_VERSION] [-i SNMP_TRAP_IPS] [--redis-host=REDIS_HOST] [--redis-bind[=REDIS_BIND] [--redis-passwd[=REDIS_PASSWD] [--redis-port=REDIS_PORT] [--redis-sock[=REDIS_SOCK] [--rbthost RBT_HOST] [--vcdlogin VCD_LOGIN] [--vcdpasswd VCD_PASSWD] [--vcdvhost VCD_VHOST] [--rbtlogin RBT_LOGIN] [--rbtpasswd RBT_PASSWD] [-a] [-y] [-D] [-t] [--noservices] [--ha-install] [--rake=RAKE_TASKS] [-h]
     Database server options:Default database SQL server is MySQL Server. Please use one of the following option to install LOCALLY.
    --mariadbMariaDB Server
     --communityMySQL Community Server
    --perconaPercona Server
    --percona-clusterPercona Cluster

    MYSQL_*Options are useful if MySQL is already installed and configured.
    -m MYSQL_HOSTMySQL host. Default is 'localhost'
    --mysql-port=MYSQL_PORTTCP port where MySQL Server serves connections. Default values is 3306 for the local installation
     --mysql-sock[=MYSQL_SOCK]Unix socket on which MySQL Server serves connections. Default values is /var/lib/mysql/mysql.sock. Used if local server only. The socket is unset if the option's argument isn't specified.
    -p MYSQL_PASSWDMySQL password. Random is generated if is not set or specified.
    -d MYSQL_DBOnApp MySQL database name. Default is 'onapp'
    -u MYSQL_USERMySQL user. Default is 'root'

    REDIS_*Options are useful if Redis Server is already installed and configured.

    IP address/FQDN where Redis Server runs. It is used by Control Panel to connect to Redis Server. The Redis Server will be installed and configured on the current box if localhost/ or box's public IP address (listed in SNMP_TRAP_IPS) is specified. Default value is If local Redis, it will serve as well on the unix socket 'PORT' (if --redis-sock without argument isn't specified).
    --redis-bind[=REDIS_BIND]The IP address for Redis Server to serve connections (to listen). The option isn't mandatory.
    --redis-port=REDIS_PORTRedis Server listen port.
    Defaults are:
    0 - if local server
    6379 - if remote server
    --redis-passwd[=REDIS_PASSWD]Redis Server password to authentificate.
    Random password is generated if the option's argument isn't specified.
    By default no password is used for local Redis.
    --redis-sock[=REDIS_SOCK]:Path to the Redis Server's socket. Used if local server only. Default is /var/run/redis/redis.sock. The socket is unset if the option's argument isn't specified.

    ADMIN_*Options are used to configure OnApp Control Panel administrator data.
    Please note, that these options are for NEW INSTALL only and not for upgrade


    CP administrator password
    -F ADMIN_FIRSTNAMECP administrator first name
    -L ADMIN_LASTNAMECP administrator last name
    -E ADMIN_EMAILCP administrator e-mail

      --rbthost   RBT_HOST  IP address/FQDN where RabbitMQ Server runs. The RabbitMQ will be installed and configured on the current box if localhost/ or box's public IP address (enlisted in SNMP_TRAP_IPS) Default value is
    VCD_*Options are usefull if vCloud/RabbitMQ are already installed and configured.
    --vcdlogin  VCD_LOGINRabbitMQ/vCloud user. Default value is 'rbtvcd'.
    --vcdpasswd VCD_PASSWDRabbitMQ/vCloud user password. The random password is generated if isn't specified.
    --vcdvhost  VCD_VHOSTRabbitMQ/vCloud vhost. Default value is '/'
    RBT_*  Options are used to configure RabbitMQ manager account. If local RabbitMQ server.
    --rbtlogin  RBT_LOGIN RabbitMQ manager login. The default value is 'rbtmgr'.
    --rbtpasswd RBT_PASSWDRabbitMQ manager password. The random password is generated if isn't specified.

    --rake RAKE_TASKSList of OnApp Control Panel rake tasks (separated with space) to run at the very end of install or upgrade.
    -v ONAPP_VERSIONInstall custom OnApp CP version
    -i SNMP_TRAP_IPSIP addresses separated with coma for snmp to trap
    -yUpdate OS packages (except of OnApp provided) on the box with 'yum update'.
    -aIs not interactive. Process with automatic installation. Please note, this will continue OnApp Control Panel install/upgrade even if there is transaction currently running.
    -tAdd to the database and download Base Templates. For new installs only. If this option is not used, then only the following mandatory System Templates will be added by default during fresh install: OnApp CDN Appliance; Load Balancer Virtual Appliance; Application Server Appliance.

    Do not start OnApp services: monit, onapp and httpd
    Please note, crond and all OnApp's cron tasks remain running. They could be disabled by stopping crond service manually for your own risk.

    -DDo not make database dump, and make sure it is disabled in the cron and not running at the moment.
    --quick|--quick-update[=SERVICE] Procceed with quick update procedure. This will skip update and configuration for services, such as system packages, MySQL database, Redis Server, RabbitMQ Server, and Monit service. Set the SERVICE parameter (space separated list of statements) to define services, which need to be updated. Possible reserved statements are:                   rpms - for 'system packages' upgrade;
    mysql - for MySQL databse upgrade ond configuring;
    redis - for ERedis Server upgrade and configuring;
    rabbitmq - for RabbitMQ Server upgrade and configuring;
    monit - for Monit upgrade and configuring.
    --accept-eulaAutomatically accept OnApp's End User License Agreement.
    -c CONFIG_FILECustom installer configuration file. Otherwise, preinstalled one is used.
    -hPrint this info
  5. Start OnApp related services (like onapp, onapp-licensing, httpd) if ‘—quick-update’ option was used for the installer.