Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Note

Ensure that the following permissions are enabled before setting firewall rules for your container server:

  • Create own firewall rules
  • Destroy own firewall rules
  • Read own firewall rules
  • Update own firewall rules
  • Update own container server
  • Read own container server

You cannot apply firewall rules to container servers which are parts of a blueprint.

You can set the following:

Anchor
1
1
Add a specific firewall rule

To configure a firewall rule:

  1. Go to your Control Panel's Container Servers menu.
  2. Click the label of the servers for which you want to configure a firewall rule.
  3. Click the Networking tab, then click Firewall.
  4. On the page that appears, set the following:
    1. Choose the network interface.
    2. Specify if the rule defines requests that should be accepted or dropped.
    3. Set the IP address for which this rule is active.
      • Leave the empty field to apply this rule to all IPs
      • Enter hyphen-separated IPs to apply the rule to an IP range (e.g. 192.168.1.1-192.168.1.10)
      • Enter the IPs with slash to apply the rule to CIDR (e.g. 192.168.1.1/24)
    4. Set the port for which this rule is effective.
      • Leave the empty field to apply the rule to all ports
      • Enter colon-separated ports to apply the rule to a port range (e.g. 1024:1028)
      • Enter comma-separated ports to apply the rule to the list of ports (e.g. 80,443,21)
    5. Protocol type (for ICMP protocol only) - indicate a type of the ICMP protocol (range from 0 to 255)
    6. Choose the protocol (TCP, UDP, DCCP, SCTP or ICMP). 
  5. Save the rule by clicking the Add Rule button. The rule will be saved in the UI, but the transaction won't be started until you click the Apply Firewall Rules button.
  6. To start the transaction which runs firewall rules for a container server, click Apply firewall rules button.
  7. Use Up and Down arrow buttons in the left column to change firewall rule position.
  8. To edit or delete a firewall rule click the appropriate icon in the last column.

Anchor
2
2

Default firewall rules

To set default firewall rules for a specific network interface:

  1. Go to your Control Panel's Container Servers menu.
  2. Click the label of the container server for which you want to configure a firewall rule.
  3. Click the Networking tab, then click Firewall.
  4. On the page that appears, go to Default firewall rules section.
  5. Choose ACCEPT or DROP command next to the network interface and click Save Default Firewall Rules. The rule will be saved in the UI, but the transaction won't be started until you click the Apply Firewall Rules button.

Example:

The Int1 ACCEPT 122.158.111.21 22 TCP firewall rule means that the Int1 network interface will accept all requests and packets addressed from 122.158.111.21 using the TCP protocol on port 22.
The Int2 DROP 122.158.111.21 22 UDP firewall rule means that the Int2 network interface will reject all requests and packets from 122.158.111.21 using the UDP protocol on port 22.

...