Page tree
Skip to end of metadata
Go to start of metadata
 This section is the part of the OnApp installation procedure.
Install Control Panel Server > Install Compute Resources > Install Data Stores > Install Backup Server > Configure Cloud

 

 

Once you've set up your hardware, the final step is to configure your cloud in your Control Panel. This section explains how to configure a basic cloud. If you complete these steps you should be in a position to create VSs.

To avoid VNC console issues, make sure that ServerName Apache setting matches the SSL certificate.

 

1. Configure Control Panel Settings

Once you have installed OnApp, you need to make the necessary Control Panel configurations. Set the  systembackups/templatesinterface and defaults CP options.

 

2. Configure Compute Resources

To deploy virtual servers, you need to add compute zones and compute resources to your cloud. After that, attach the newly created compute resource to the compute zone you've added. Make sure to enable Integrated storage in the Settings > Configuration to group compute resource drives together into a virtual data store. Also, to use Integrated Storage, select the compute zone as a storage API endpoint. 

3. Configure Data Stores

To provide your virtual servers with storage space, you need to configure data store zones and data stores. Data stores can be Traditional/ Centralized SAN and OnApp Storage/Integrated SAN. You should also attach the new data store to the data store zone you've added.
In case of Traditional storage you need to configure data store(s) on your compute resource. The commands below use /dev/sda5 as an example. You can find the volume group identifier we're using in the second command, from the Data Stores screen in the Control Panel. Follow these steps for each local storage block on the compute resource:

bash#> pvcreate --metadatasize=50M /dev/sda5
bash#> vgcreate onapp-ar0akk2wyer3tf /dev/sda5

4. Configure Networks

To provide IP address(es) to your future virtual servers, you need to perform the necessary network configurations. To do this, create  network zones and networks. When adding the network, select the network zone you've created. The network will be automatically attached to the network zone you chose during creation. You should also add a range of IP addresses to the new network.

5. Configure Relations Between Entities 

Once you've added all the necessary resources to your cloud, you need to associate them with the compute resource you've created in Step 2. For this, assign the data store (Step 3) and network (Step 4) to the compute resource (Step 2).

6. Configure Templates

To built Linux virtual servers you need to download templates using the UI downloader. For this, install XEN and KVM templates and create a template store. You should also add the installed templates to that template store.

7. Configure ISOs

To be able to later build and boot VSs from ISOs, additional steps are required. For more information refer to the Additional Considerations for ISOs section.

  • No labels